Plumbing across Sydney.
24/7 emergency plumbing

Tap Repairs and Installation

Tap Repairs Sydney

Repair dripping or leaking taps, replace worn parts and install kitchen, bathroom, laundry and outdoor tapware. Send a photo for planned work so the tap type and access can be understood.

  • Washers, cartridges and mixer faults assessed
  • Compatible fittings checked before replacement

Panther Plumbing Group · NSW contractor licence 388782C · Check the licence (opens in a new tab)

Get a quote

Tell us the suburb and which taps are leaking and from where. Add photos if helpful.

Tap Plumbing

Fix the Leak or Install Suitable New Tapware

A dripping tap may need a washer, cartridge, seal or seat repair. Water at the base or inside a cabinet can come from the tap body, flexible connectors or pipework rather than the outlet itself.

For a replacement, send the tap model and a photo of the fixture and connections where possible. Mounting holes, pressure requirements, clearances and isolation points can affect compatibility.

Outdoor tap, water meter and copper connections beside a fenceOn the job with Panther

Outdoor tap, water meter and copper connections beside a fence

See our work
  • Dripping Taps

    Assess washers, cartridges, seats and seals.

  • Leaks at the Base or Connections

    Check the tap body, hoses, valves and surrounding pipework.

  • New Tap Installation

    Confirm the fixture, mounting and connection requirements.

  • Kitchen, Bathroom and Outdoor Taps

    Repair or install tapware suited to the location and use.

The work we do

Tap Plumbing Services

Plumber removing a basin tap cartridge

Leaking Tap Repairs

The failed part depends on the tap design. Traditional taps, mixers and ceramic cartridges are assessed differently, and water around the base may involve a connection below the fixture.

  • Washers and O-rings
  • Mixer cartridges
  • Tap seats and bodies
  • Flexible connections
Kitchen mixer being fitted to a sink

Kitchen and Bathroom Tap Installation

Before installation, the tapware should be checked against the fixture, hole pattern, pressure requirements, clearances and existing water connections.

  • Kitchen mixers
  • Basin and bath tapware
  • Laundry taps
  • Compatibility checks
Outdoor tap fitted to a brick wall

Outdoor and Utility Taps

Outdoor taps can fail at the valve, body, wall connection or supply line. Replacement may require support or pipework where the existing fitting is loose or corroded.

  • Garden taps
  • Balcony and courtyard taps
  • Wall connection repairs
  • New utility tap points

Tap Faults

Signs a Tap Needs Repair or Replacement

The location of the water helps identify whether the fault is inside the tap or in the connection

The Outlet Drips

A washer, cartridge, seat or internal seal may be worn.

Water Leaks Below the Fixture

The body, hose, valve or pipe connection may be leaking.

The Handle Is Stiff or Loose

Internal parts or the tap body may be worn or damaged.

New Tapware Does Not Fit

The fixture, holes, clearances or connections may not match the selected model.

What affects the cost of tap repairs?

The type of tap, failed component, availability of parts and access to the connections affect the price.

A washer or cartridge repair may be suitable when the tap body is sound. Replacement or work on concealed fittings can involve additional parts and access.

What happens next

How we handle tap repairs and installation

  1. Tell us the tap

    Which taps leak and where the water comes from. A photo helps.

    Timing: A few minutes

    Your part: Send a photo of the tap.

  2. Find the cause

    We check the tap, its parts and the connections behind it.

    Timing: Usually under 30 minutes

  3. Repair or replace

    We fit the part, or install new tapware if the old tap is worn out.

    Timing: Under an hour for most repairs; 1–2 hours for a new mixer

  4. Checked and explained

    We test the work, explain the result and leave the work area tidy.

    Timing: Before we leave

FAQs

Questions about tap repairs

Practical answers before you arrange the work

Why is my tap dripping?
The cause may be a worn washer, cartridge, seal or tap seat. The tap type needs to be identified before the correct repair can be confirmed.
Should I repair or replace the tap?
Repair is often practical when the body is sound and parts are available. Replacement may be preferable for a damaged, corroded or incompatible tap.
Can you install tapware I have purchased?
Yes, subject to compatibility with the fixture, hole pattern, pressure requirements, clearances and existing connections.
Will replacing the tap fix low water pressure?
Not always. A blocked outlet or cartridge may affect one tap, while a supply or pipework problem can affect several fixtures. Tell us which outlets have changed so the cause can be checked before new tapware is purchased.

On the job with Panther

Our work, up close

A basin, mixer and waste fitting from our fixture work. The connections matter just as much as the finish.

Family-owned and trading since 2022, we carry out plumbing work across Sydney.

Explore our work
White countertop basin with a black mixer and waste fitting
White countertop basin with a black mixer and waste fitting

Google reviews

What Customers Say

Reviews from our Google Business Profile

5 out of 5 from 26 reviews on Google

Manjit Dagar

Great service by PPG team particularly Ahmed who has been very professional in handling and fixing our sewage issue and also kitchen tap/drainage installations. Highly recommend Ahmed for his plumbing expertise. Thanks

Ari Stathis

Great service, on time and kind staff.

Jack

Very friendly plumber, job is done quickly and up to quality.

Read all reviews on Google

Across Sydney

Tap Repairs & Installation across Sydney

Tell us your suburb and the work you need. We service these Sydney regions, with local information on each area page.

More local service information

Talk to Panther

Need a Tap Repaired or Installed?

Send a clear photo of the tap, fixture and leak location so the planned work can be discussed.