
Cistern and Flush Repairs
Continuous running, slow filling or poor flushing can result from worn valves, seals, buttons or adjustment problems inside the cistern.
- Inlet valves
- Outlet seals
- Flush buttons
- Cistern adjustments

Toilet Repairs and Installation
Help with running cisterns, leaks, weak flushing, blockages and damaged toilet suites, plus replacement and new installation work.
Panther Plumbing Group · NSW contractor licence 388782C · Check the licence (opens in a new tab)
Toilet Plumbing
A running toilet is often a cistern-valve or seal problem, while water around the base may involve the pan connection, supply or surrounding floor. A blockage can be local to the toilet or part of a wider drain problem.
For replacement, share the existing toilet and selected model where possible. Set-out, water connection, floor condition and access all need to match before installation proceeds.
On the job with PantherOpen toilet cistern showing the inlet and flush mechanisms
See our workRepair faulty fill, flush and sealing components.
Check the supply, cistern, pan connection and surrounding area.
Assess whether the obstruction is local or connected to the main drain.
Confirm the suite, set-out and connection requirements.
The work we do
Toilet Faults
A small cistern fault can waste water, while leaks and overflows need quicker attention
The cistern continues filling or water flows into the bowl between flushes.
The button, valve or water level is not operating as intended.
Stop using the toilet if the leak may contain wastewater or the floor feels soft.
Repeat blockages may involve the fixture, pan connection or main drain.
Replacing a cistern valve is different from replacing a complete toilet or changing the waste connection.
The fault, availability of suitable parts, pan type and access affect the cost. We check whether the existing toilet can be repaired before discussing a new suite.
What happens next
What the toilet is doing, and the brand if you know it.
Timing: A few minutes
Your part: Turn off the toilet’s stop tap if it keeps running.
We check the cistern parts, the seals and the drain connection.
Timing: Usually under 30 minutes
We fit the right part, or explain when a new suite is the better value.
Timing: About an hour for most repairs; 2–3 hours for a new suite
We test the work, explain the result and leave the work area tidy.
Timing: Before we leave
Practical answers before you arrange the work
On the job with Panther
Toilet suites and water connections from our work, showing the fixtures and fittings we work with.
Family-owned and trading since 2022, we carry out plumbing work across Sydney.
Explore our work

Google reviews
Reviews from our Google Business Profile
4.9 out of 5 from 27 reviews on Google
Adam was punctual, professional and diagnosed the source of the water leak from our in wall toilet. No call out fee or hidden costs. Would definitely call for his services again (hopefully never have to though).
Great service, on time and kind staff.
Very friendly plumber, job is done quickly and up to quality.
Across Sydney
Tell us your suburb and the work you need. We service these Sydney regions, with local information on each area page.
Talk to Panther
Send a photo of the toilet and fault, or call if it is overflowing or the only toilet cannot be used.